Open Overlay
Shincci Low temperature container type sludge dryer is especially suitable for dewatered sludge coming from chamber filter press, drying sludge from initial moisture range 83%～40% to achieve 10～40%. The drying temperature is 60~75℃, which makes high drying efficiency. Forced air cooling makes it no need for additionalmounting of cooling water and water consumption. Closed cabinet structure makes less heat dissipation and less odor emission. Accurate humidity control technology avoids high energy consumption in later stage of drying.
It is a combination of sludge hopper and dehumidification heat pump. Dehumidification heat pump heat up and dehumidify the air, while the sludge is placed into a hopper. The hot air is blow up from the bottom and recycle at the heat pump. The electricity power consumption is 0.4~0.5 kWhr/kg.H2O.
The container dryer is operated in a batch mode. After we plug on the machine and load the sludge, it is ready to start to dry the sludge. The dryer is using timers to control the batch operation time. So it is easy to install and use without frequent monitor.
COMMON TECHNICAL SPECIFICATION | |
Energy Consumption | 2.0-3.5kg.H2O/kw.h |
Compressor Amount | 1 set |
Cooling Method | Forced-air cooling FL |
Refrigerant | R134a |
Power Supply | (220V\380V\440V)/3H/50Hz(60Hz) |
Drying Temperature | 40-63℃(return air)/55-75℃(supply air) |
Control System | Touch screen + PLC programmable control system |
Applicable Range for Outlet Sludge | 10%-30%（Moisture Content） |
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
Powered by Froala Editor
